Get Estimate

 

 

What are your beliefs on Hot Water Heater Repair?

Numerous modern residences use an electric hot water heater for their heater, due to its comfort as well as convenience of use. Nevertheless, just like any other electric home appliances, problems might occur with its use, suddenly. It can be really frustrating to awaken to a chilly shower as opposed to a warm one or having your bath with water that isn't warm enough or perhaps too warm. Whatever the situation might be, water heater problems can be rather nerve-racking. Luckily, we've made a listing of possible options to your water heater concerns. There are a number of aspects that could trigger many of these issues, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you turn off the major power supply for safety. Whatever the issue is, getting it fixed ought to not posture excessive of a concern if you follow these steps:

 

Call A Specialist:

If after replacing all malfunctioning components as well as resetting your temperature level, the water heater still isn't working, you might need to get in touch with a specialist plumber for a professional viewpoint. The trouble with your heater could be that the hot and cold faucets have been changed or it might be undersized for the quantity of hot water needed in your house. Whatever the case may be, an expert plumber would certainly help resolve the issue.

 

Examine Your Power Supply:

As basic as this may appear, it is really necessary. Without sufficient power, your hot water heater will certainly not function. So the first thing to do when your water all of a sudden stops working is to validate that it isn't a power trouble. Check if the fuse is blown out or the circuit breaker stumbled. If the breaker is the concern, simply turn it off and on once again. Change any kind of broken or worn-out fuse. Evaluate the home appliance with power after these modifications to see if it's currently functioning.

 

Check Your Thermostat:

If your water heater still isn't working or the water coming out isn't hot enough, you might require to examine the temperature level setups on your top thermostat. Ensure the circuit breaker is switched off before doing anything. Open the gain access to panel as well as press the red switch for temperature level reset over the thermostat. This should help heat the water. Turn the circuit breaker back on as well as inspect if the issue has actually been solved.

 

Inspect the Burner in the Hot Water Heater:

If it's not a power issue, after that attempt taking a look at your burner if it is still functioning. Check each of your burner to make sure the issue isn't with any of them. If any of them is defective, replace that part and then check whether the hot water is back on.

 

Conclusion

Hot water heater troubles are not constantly significant. Much of them are because of small problems like a blown fuse or worn-out heating element. Replacing the damaged components must work. Nevertheless, if you are still not able to resolve the problem, give a call to your nearest plumber ahead to get it taken care of.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

As a passionate person who reads about No Hot Water — Water Heater Repair, I thought sharing that blog post was a great idea. Are you aware of anybody else who is excited about the subject? Take a moment to promote it. I praise you for your time. Come back soon.

Explore Now